Gossen Metrawatt, M630G, MetraVolt 12D +L Voltage and Continuity Tester

M630G Includes Only:

• 1 Voltage tester
• 1 Operating instructions
• 1 Battery

Features:

• Measured Value: Storage The displayed measured value can be "frozen" at the LCD by pressing the Hold key.
• Self-Test and Battery Monitoring: The self-test checks all display elements and device functions. A signal is generated automatically if the battery requires replacement.
• Rugged Housing: The impact-resistant, dust-tight housing makes the instrument virtually indestructible. The display is protected by means of an unbreakable cover. The instrument can also be used in precipitation thanks to IP 65 protection.
• High Safety Levels: Excellent electrical safety is achieved by means of series resistors integrated into both test probes.

Applications:

• The MetraVolt 12D+L is a 2-pole voltage tester with a digital display combined with integrated continuity, phase, polarity, and phase sequence testing.
• It allows for the safe detection and measurement of AC and DC voltages within a range of 24 to 1000 V at frequencies of up to 4 kHz.
• Resistance can also be measured within a range of 0 to 1999 kΩ with the integrated continuity tester.
• Voltage and resistance values appear in digital format on the LCD.
• Additionally, three LEDs indicate dangerous contact voltage and phase sequence, another LED indicates resistance and a sound generator indicates continuity

The voltage tester is switched on automatically as soon as a voltage of at least 24 V is applied. The respective voltage measuring range and voltage type are selected automatically. If interference voltages of greater than 24 V are detected, the instrument switches automatically from the continuity test to the voltage test. The instrument is switched off automatically approximately 30 seconds after the last measurement in order to extend battery life.