ATG LED Lighting, PSC-BL-I-RT-DC0-BLE-SR, TruBlu SIG Mesh PIR 0-10V Dimming Sensor, 12-24VDC, Remote Head
Features:
- Dual Element PIR sensor
- 0-10V configurable output: set to 0% (OFF)* , 10%, 25% or 50% dimming
- Photocell for ambient light detection
- Time delay 1 adjustable 5 sec to 30 min
- Time delay 2 adjustable 10 sec to ∞
- LED Motion indicator
- Active High/Low outputs for Relay drive
- Mounting height of 10ft (3m).
- 360° coverage pattern
- Bluetooth add-on enables remote sensor programming with greater customization of dimming levels, time delays, and ambient light sensitivity
End users can program length of time delays, light level sensitivity, sensor range and other settings using a series of dipswitches and trimpots.
Bi-level Dimming**: 0-10V bi-level dimmer connects to 0-10V control on the LED driver. When motion is detected the sensor will bring lighting up to 100% lumen output. When no motion is detected for the length of TD1, the sensor will send a signal to dim lighting to a specific level set by the end-user. If no motion is detected for the length of TD2, the sensor will send a signal to shut off the light.
Relay Control: Two additional High and Low control outputs can be used to trigger relays or other control circuitry.
Bluetooth smart and Bluetooth mesh: The Bluetooth Low Energy (BLE) enabled version pairs with an Android or iOS application to allow initial setup and subsequent sensor adjustments, beyond what the analog controls on the sensor can offer. The mobile application enables adjustment of sensor parameters such as time delay, dim level, sensitivity, ambient light level, and more. Additionally, features such as parameter profiles, manual dim control, and real-time feedback from the sensor can speed up configuration and provide custom user control. The Bluetooth Smart™ enabled sensors support mesh networking through a variety of software and wireless platforms.
**The sensor will dim the light if motion is not detected for the first time delay (TD1) and shut off the light if motion is not detected for the sec- ond time delay (TD2). TD2 will only count down after TD1 has expired and the light has dimmed. If motion is detected during TD2, the light will return to full output, and TD1 will restart.
Detection Area
